Buell Motorcycles - Ecm SPY Setup Setup Free ##VERIFIED##
Download ->>->>->> https://tiurll.com/2t8jMn
Since the standard O2 sensor will be used for control when tuning iscomplete, the standard O2 narrow band sensor needs to be used to setup in the Closed Loop and Closed Loop Learn for the rear cylinder.
[ Airbox Pressure Correction ] was set up as shown in Table 14 to setup the (airbox pressure % of baro)/(corr air box pressure %) table,which in this implementation can be simplified to BarokPA/correction%. The values assume a 3% reduction in fuel per 5 kPa.
Everything I have is Apple I hope you have something with Windows, as there is no native Mac solution. If you have Bootcamp setup you can boot into Windows and use that. Also, the free ECMspy is not compatible with your 09, you will need to either get the paid version, or use TunerPro (free but a real pain in the ass to setup and use) Hugie03flhrPosted on Friday, May 19, 2017 - 09:44 am: Thank you Froggy for that detailed explanation that I actually understood very well! Now I have a good idea what to do. Question; when you say paid version... Is that a one time fee or is it like HP Tuners where every time you tune something, you have to keep paying for more (bits, bites, whatever they call it)? SagehawkPosted on Sunday, May 21, 2017 - 12:43 pm: That fee everyone speaks of is a donation to the papworth hospital on behalf of the authors of ecmspy. There was a member of there group that got sick and finally passed but papworth was the primary facility for her care. So , no matter what folks think of having to pay for ecmspy, this is gunter's and other authors way of licensing your software and supporting a good cause. That being said,, when you download the non working paid for ecmspy, then do the process of your donation, gunter is notified that is complete. Then he will download to your account a file to activate your spy. You will be fully functional at that point. Now, when you download the non working version, do it on the computer or whatever that program will be on. The registration will include a key that will only work on that device only. This keeps you from sharing the whole program with your friends. Now on ecmspy.com there is a list of ecms that have a designation. My 07 12 x ecm is a bueib designation. The license for that was 72.50 usd. I can work with 2005 thru 2007 ecms of that designation. Other designation will cost 72.50 apiece. Just depends on the different buells you or your friends own. I've helped 2 other fellas out with the spy and it's worked fine. File management becomes utmost paramount at that point to keep up with what is yours or your buds. Hope this has helped a bit as its been a journey for me. Read everything twice at least on ecmspy.com to get all info you can. TootalPosted on Sunday, May 21, 2017 - 06:07 pm: Sage advice oh Sage one! SagehawkPosted on Sunday, May 21, 2017 - 08:22 pm: Why thanks , Tootal! Just trying to help as I have been helped. There are mechanical types and electrical types . Each of us has some thing to offer freely if only we would. Btw, Tootal, new job is working out great! No more driving 500, 600 miles a week. Am home with time to do stuff in the evening even! TootalPosted on Sunday, May 21, 2017 - 08:49 pm: FroggyPosted on Monday, May 22, 2017 - 08:45 am: quote: Is that a one time fee or is it like HP Tuners where every time you tune something, you have to keep paying for more (bits, bites, whatever they call it)? The fee for ECMspy is once per ECM, so if you have two bikes you would need to pay twice, but you can do whatever you want unlimited on those after that. If you swap in a Race ECM you would need to pay again, so keep that in mind if you plan on getting one. HP Tuners is similar how it works, you have to buy a credit to unlock each vehicle you use it on, but once unlocked you can do whatever you want. JasonmcelroyPosted on Monday, May 22, 2017 - 12:34 pm: Has anyone had success using ECM Spy with the IDS ECM? I really would like to get some data beyond just error codes for troubleshooting. Just got through a week of tracking down a stalling and hesitation issue and felt like I was working blindfolded. I don't own any android devices so I'd like to hear from someone who's done it before I go to the trouble of getting an android just for tuning the bike. Thanks! Jason Hugie03flhrPosted on Thursday, May 25, 2017 - 06:03 pm: Thanks Sagehawk!!! SagehawkPosted on Friday, May 26, 2017 - 06:40 pm: Your welcome Hugie03flhr. Sometime the frustration outweighs the benefits. Version 2 of spy is what I use mostly and after a while, since I don't travel much, it's as good as it is gonna get. Next step at next motor roll, I'll pull header and get a 02 bung welded in front header pipe and might consider wide band sensors to continue learning curve to tune front and rear together. Unless you buy a pipe or a whole system, it's hard to find trusty maps for still stock setups. Then it still needs tweaking I've got my rear cylinder pretty much dialed in with narrow band sensor but I'm not so sure what to do with the front until I get a sensor in that header. Any ideas are welcome from the masses out there. Some say to copy , paste rear to front and add 2 over that across entire map. Well see as time goes. Hugie03flhrPosted on Saturday, May 27, 2017 - 06:43 pm: Sagehawk, I didn't realize our ECM was capable to handle a wideband O2, never mind front and rear O2 sensors. That's pretty cool. I was just gonna pull the trigger on an IDS ECM . They have one for stocke exhaust and KN air filter. My thinking was to have an extra ECM tucked under the seat just in case it ever fails out on a trip. SagehawkPosted on Saturday, May 27, 2017 - 09:48 pm: its not so much the ecm. when tuning like that ecmspy or tuner pro is the software that takes the info and interprets what the sensor voltage is. that conversion of voltage to exhaust gas oxygen lets you know what your mixture is. anywhere from 12 to say 17. the paid verson of megalog viewer will support a panel of other settings beside 14.7 stoichmetric. so you can tune the whole map to what you want, not just the closed loop area. narrowband sensors read 0-1 volts and widebands read 1-5 volts. in the end, once whole map is what you want, then you wind up back to narrowband with your ecm for normal operation. some folks tune maps without running o2 sensor later. but then the adjustibility of the system is no longer there. thats ok for the person that stays in a geographic area and doesnt worry about altitude or changing weather conditions. thats why the afv is a dynamic thing. it will slightly change as you ride under different conditions. in the end, a bought ecm from ids is the best way to go for the average rider. all this other stuff can get a person into trouble and can kill the bike. I play with this stuff as they say old people need to exercise their brains. I like learning new stuff and being able to help others if i can. most folks just dont have the patience. Sad but the world has changed. PhelanPosted on Saturday, May 27, 2017 - 10:08 pm: I have been changing target AFRs without issue in the free Megalog Viewer. On 03-07 bikes, there is also a workaround to change the target AFRs with ECM Spy format save files (not with the program itself, but with notepad). SagehawkPosted on Sunday, May 28, 2017 - 02:22 pm: Phelan, thanks for correction. There is still a lot I am learning bout programs. When changing afr in mlv , are you tuning with a wide band or narrowband? Version 1 spy as well?« PreviousNext » 2b1af7f3a8